Base Lacquer Putty MB-06 manufacturer from China Guangzhou Mebong Architectural Decoration Co., Ltd.

Price:	1.0~2000.0 USD
Payment Terms:	T/T,L/C
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MB-06

Production Capacity: 500 tons/month

Delivery Date: within 10 days

Means of Transport: Ocean

Packing: 25kg/bag

Brand Name: Mebong

This product is a new high-strength coating bottom ash, mainly used for the leveling rough surface of cement mortar or concrete walls

Features:

This product is a new high-strength coating bottom ash, mainly used for the leveling rough surface of cement mortar or concrete walls, providing a good base surface for the layer lacquer putty, to reducing the amount of surface lacquer putty and low down the project cost

1, strong cohesive force, can be well attached to the base surface

2, has a certain flexibility, can be a good buffer layer for different substrates of stretching stress

3, excellent aging resistance and good ability of anti-infiltration

4, environmental-friendly product, non-toxic, and safety

Surface Treatment:

The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. New plaster surface should maintenance about twelve days before inserting the lacquer putty, do not use cement paste for calendaring. If the wall is too dry, wet the wall before operation till there is no obvious water on the surface

Operation Process:

1, using appropriate amount of water (about 3: 1) to transfer it into a paste (namely 25kg powder + 7.5kg water)

2, according to the water-cement ratio, pouring the water into the stirring barrel, adding the powder, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect

3, using point-mending method to repair the base side for those large different places, after dry use a spatula evenly to spread the slurry on the base surface, and control the thickness under 2mm.

4, dry after 24h, can make the operation of the surface lacquer putty.

Technical Reference:

Compression and shear bond strength≥1.2MPa	original tensile strength≥0.6MPa	Waterproof tensile strength≥0.5MPa
Tensile strength resistance to freezing and thawing≥0.5MPa	Tensile strength of alkali ≥0.5MPa	Heat-tensile bond strength≥0.5MPa

Normal Amount:

about 1.5~2.0kg/m², according to the smooth of the surface

Cautions:

1, never mix the dry slurry with water and use again

2, this product requiring operating under 5℃~40℃ situation, never operate under raining.

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:

2kg/bag, 25kg/bag