Marble Adhesive from China manufacturer - Guangzhou Mebong Architectural Decoration Co., Ltd.

Price:	1.0~2000.0 USD
Payment Terms:	T/T,L/C
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MB-05

Production Capacity: 500 tons/month

Delivery Date: within 10 days

Means of Transport: Ocean

Packing: 25kg/bag

Brand Name: Mebong

this product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone

Features:

1. this product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, and natural stone material

2. the indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board

3. can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface

4. excellent flexibility, can bear the bonding layer stretch that caused by temperature

5. good anti-infiltration function

6. no need to wet the brick wall, effectively improve the efficiency

Surface Treatment:

1. the substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.

2. for the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction

Operation Process:

1. using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m²

2. push the ceramic tile or heavy type ceramic tile above it

3. for the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material

Cautions:

1. never mix the dry slurry with water and use again

2. for the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation

3.for the painting surface, make sure the initial bond strength and no flake

4.operating under 5℃~40℃ situation

5.clean the surface by little wet sponge or cloth before it dry

6.leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler

Technical Reference:

Coverage area(amount)	Technical reference
using 3*3mm tooth scraper about 1.7kg/m²	1, adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
using 6*6mm tooth scraper about 3.0kg/m²	2, cool time: about 10min (cool time: the longest cool time that the adhesive can last )
using 10*10mm tooth scraper about 4.5kg/m²	3, dry time: 24h (according to the weather)
using 10*10mm tooth scraper about 4.5kg/m²	4, water resistance: excellent; non-toxic, prevent fire
the smoother the surface, the less amount	5, when dry, anti-weak acid, anti-strong alkali and oil resistance
the smoother the surface, the less amount	6, cut degree: >1.2MPa (14days later)